Recharging Your Battery; Connect Devices - NETGEAR AirCard 790 Quick Start Manual

Recharging Your Battery

Your battery comes partially charged.
¾ To recharge your battery:
1. Connect the micro-USB cable to your
mobile hotspot.
2. Connect the other end of the cable to
the USB port on your computer or to
the USB charger.

Connect Devices

You can add devices to your network using
a WiFi network manager or WPS if the
device can use WPS.
Note: WPS enables you to connect WPS-
enabled devices to a WiFi network without
entering a WiFi password using a keyboard.
10