Table of Contents
Advertisement
Pre-wash water
You can choose for the pre-wash to
be carried out with either hot or cold
water (not available with the Curtains
programme). Hot water can only be
only taken in if the wash temperature
is above 30°C.
The setting is confirmed when the
machine is commissioned.
Main wash water
You can choose for the main wash to
be carried out with either hot or cold
water (not available with the
Woollens, Curtains and Proofing
programmes). Hot water can only be
only taken in if the wash temperature
is above 30°C.
The setting is confirmed when the
machine is commissioned.
The machine will need to be set up
specifically for Recycled water if this
option is selected.
Settings/Supervisor level menu
Rinse water
You can choose for the rinses in the
Cottons hygiene, Cottons universal,
Minimum iron and Kitchen linen
programmes to be carried out with
either hot or cold water. Hot water
can only be only taken in if the wash
temperature is abpve 50°C.
The machine is delivered with the Cold
water option selected.
The machine will need to be set up
specifically for Recycled water if this
option is selected.
Low water pressure
This setting can be activated to
ensure problem free water intake
where the water pressure is
constantly low (below 100 kPa).
The machine is delivered with this
option deactivated.
Empty sensor
You can activate the Empty sensor
option for the external liquid
detergent containers so that a
message appears in the display
when a container is empty.
The factory default setting is No (no
empty sensor).
73
Advertisement
Table of Contents
