Table of Contents
Advertisement
Problem solving guide
With the help of the following notes, minor faults in the performance of this
machine, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
,
Repair work to electrical appliances should only be carried out by a
suitably qualified person in strict accordance with current local and national
safety regulations. Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for unauthorised work.
The programme does not start
Problem
The display remains
dark.
The programme
does not start when
Spin has been
selected.
There is a fault
message in the
display.
The display is dark
and the Start button
is flashing slowly.
42
Possible cause
There is no power to the
machine.
The machine has not
been prepared for using
for the first time.
A programme cannot be
started while there is a
fault message in the
display.
The display has
switched off
automatically to save
energy (Standby mode).
Remedy
Check whether
– the machine is switched on.
– the electricity supply to the
machine is switched on.
– the fuse or circuit breaker
has tripped.
Start the Cottons 60°C
programme as described
under "Before using for the first
time".
– Make a note of what is
shown in the display.
– Press the multi-function
selector (which will confirm
the message). The fault
message will be deleted.
Press the multi-fuction selector.
The machine comes out of
Standby mode.
Advertisement
Table of Contents
