Changing The Programme Sequence; Anti-Crease; To Interrupt A Programme; To Alter A Programme - Miele PW 6065 OS Operating And Installation Instructions

Table of Contents

Advertisement

This machine has fully electronic
controls with automatic load
recognition. It takes in the right amount
of water required for the programme
depending on the amount of laundry
and its absorbency rate. This means
that programme cycles and durations
can vary.
The display shows the stage the
programme has reached.

Anti-crease

At the end of the programme, the drum
continues to turn at intervals for up to
30 minutes to help prevent creasing.
The door can be opened and items
removed at any time during the
anti-crease phase.
Exception: Anti-crease does not
operate on the Woollens programme.

To interrupt a programme

^ Switch the machine off with the K
button.
To continue with the same programme:
^ Switch the machine back on again
with the K button.
^ Confirm the message shown in the
display, and then press the Start
button.

Changing the programme sequence

To alter a programme

After the start of a programme it is no
longer possible to select a different
programme. You will need to cancel the
current programme before you can
select a new one.

To cancel a programme

You can cancel a programme at any
time after it has started.
^ Turn the multi-function selector until
Cancel is highlighted and then press
the multi-function selector to confirm
your selection.
The suds will be pumped away.
^ Open the drum door before starting a
new programme.
The machine will be locked if it is
connected to a payment system.
Whether it is possible to cancel or
change a programme will depend on
the setting selected (see Settings -
Coin mechanism lock ).
33

Advertisement

Table of Contents
loading

Table of Contents