Makita DF332D Instruction Manual
Hide thumbs
Also See for DF332D:
- Instruction manual (81 pages) ,
- Technical information (21 pages) ,
- Instruction manual (36 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita DF332D
Summary of Contents for Makita DF332D
- Page 1 INSTRUCTION MANUAL Cordless Driver Drill DF332D DF032D Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: DF332D DF032D Drilling capacities Steel 10 mm Wood 28 mm Fastening Wood screw 5.1 mm x 63 mm capacities Machine screw No load speed High (2) 0 - 1,500 min Low (1) 0 - 450 min Overall length... -
Page 3: Cordless Driver Drill Safety Warnings
as dust mask, non-skid safety shoes, hard hat, or Use power tools only with specifically desig- hearing protection used for appropriate conditions nated battery packs. Use of any other battery will reduce personal injuries. packs may create a risk of injury and fire. When battery pack is not in use, keep it away Prevent unintentional starting. Ensure the switch is in the off-position before connecting from other metal objects, like paper clips, to power source and/or battery pack, picking... -
Page 4: Functional Description
If you can see the red indicator on the causing fires, personal injury and damage. It will upper side of the button, it is not locked completely. also void the Makita warranty for the Makita tool and charger. CAUTION: Always install the battery cartridge fully until the red indicator cannot be seen. -
Page 5: Switch Action
Overloaded: Switch action The tool is operated in a manner that causes it to draw an abnormally high current. In this situation, turn the tool off and stop the application that caused the tool to become overloaded. Then turn the tool on to restart. If the tool does not start, the battery is overheated. In this situation, let the battery cool before turning the tool on again. -
Page 6: Reversing Switch Action
Reversing switch action Speed change ► 1 . Reversing switch lever ► 1 . Speed change lever CAUTION: CAUTION: Always check the direction of Always set the speed change lever rotation before operation. fully to the correct position. If you operate the tool with the speed change lever positioned halfway between the CAUTION: Use the reversing switch only after... - Page 7 A=12mm To install these types of driver B=9mm bits, follow the procedure 2. For Model DF332D (optional accessory) (Note) Bit-piece is necessary for installing the bit. To install the driver bit, pull the sleeve in the direc- tion of the arrow and insert the driver bit into the sleeve as far as it will go.
-
Page 8: Installing Hook
To remove the driver bit, pull the sleeve in the direction OPERATION of the arrow and pull the driver bit out. NOTE: If the driver bit is not inserted deep enough into the sleeve, the sleeve will not return to its original CAUTION: Always insert the battery cartridge position and the driver bit will not be secured. In this all the way until it locks in place. -
Page 9: Using Holster
Use a cutting lubricant when drilling metals. The excep- Thread a waist belt or similar through holster tions are iron and brass which should be drilled dry. holder. CAUTION: Pressing excessively on the tool will not speed up the drilling. In fact, this excessive pressure will only serve to damage the tip of your drill bit, decrease the tool performance and shorten the service life of the tool. -
Page 10: Optional Accessories
Centers, always using Makita replacement parts. OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regard- ing these accessories, ask your local Makita Service Center. - Page 12 Makita Corporation 885466-3 20150903 www.makita.com...