Panasonic DVZHWJ0600 Instruction And Installation Manual

To Installer : Make sure to pass this integrated Precautions for Use to the customer after installation.
Make sure to pass this manual to customers after installation.
Installation Section
Safety Precautions
To reduce the risk of injury, loss of life, electric shock, fire, malfunction, and damage to equipment or property,
always observe the following safety precautions.
Explanation of symbols
■The following symbols are used to classify and describe the
level of hazard, injury, and property damage caused when the
denotation is disregarded and improper use is performed.
WARNING
CAUTION
Never disassemble, repair or remodel
the product.
These actions may cause failure of the
Prohibited
equipment or the unit to fall causing injury.

Parts List

Part
Combination Rack Main unit
W900/600
Main unit mounting screw
Flat-head screw
M6x33
Main unit mounting bolt
Joint bolt
M4X16
Joint nut
Be sure to observe the following precautions.
Denotes a potential hazard that could
result in serious injury or death.
Denotes a hazard that could result
in minor injury.
Quantity
2 each
Instruction Manual
Installation Manual
Model No. DVZHWJ0600 （0900） -E
■To ensure correct installation, be sure to read these instructions
carefully before you install the Combination Rack.
■Please properly dispose of the packing materials and
residual materials in accordance with legal provisions.
■The following symbols are used to classify and
describe the type of instructions to be observed.
WARNING
Be sure to use the designated screws
to install the unit.
Be sure
Otherwise, the unit may fall, and
to
accordingly injure you.
observe.
Temporary locking screw
1 Truss head tapping screw
4X14
Blindfold cap
2
Instruction manual/
installation manual
Combination Rack
This symbol is used to alert users to a
specific operating procedure that must
not be performed.
This symbol is used to alert users to a
specific operating procedure that must be
followed in order to operate the unit safely.
(Dimensional unit: mm)
Part Quantity
2
4
1