Squawk Code Entry; Functions; Figure 1-5: Functions - Honeywell KT 74 Pilot's Manual

KT 74 Pilot's Guide

Squawk Code Entry

Press any of the numeric buttons (0 through 7) to change the
squawk code. A new squawk code is set when the fourth digit is
entered. If the code entry is not completed within 7 seconds, the
changes are ignored and the previous code restored.
Some standard squawk codes are listed below:
• 1200
• 7000
• 7500
• 7600
• 7700
1.6

FUNCTIONS

The different KT 74 functions are accessed using the FUNC button.
The functions displayed vary depending on whether the aircraft is
airborne or is on the ground (squat switch or other method of
air/ground determination installed) and has the GPS input enabled or
not as shown in the following tables.
Operation
Page 1-6
© Honeywell International Inc. Do not copy without express permission of Honeywell
VFR code in the USA
VFR code commonly used in Europe
Hijack code
Loss of communications
Emergency code

Figure 1-5: Functions

D201308000036
Rev 0 Dec 2013