Configuring LLDP trapping
LLDP trapping notifies the network management system (NMS) of events such as newly-detected
neighboring devices and link malfunctions.
To prevent excessive LLDP traps from being sent when the topology is unstable, you can set a minimum
trap sending interval for LLDP.
Follow these steps to configure LLDP trapping:
To do...
Enter system view
Enter Ethernet
interface view
or port group
view
Enable LLDP trapping
Quit to system view
Set the interval to send LLDP traps
Displaying and maintaining LLDP
To do...
Display the global LLDP
information or the information
contained in the LLDP TLVs to be
sent through a port
Display the information contained
in the LLDP TLVs sent from
neighboring devices
Display LLDP statistics
Display LLDP status of a port
Display types of advertisable
optional LLDP TLVs
Enter Layer 2 Ethernet
interface view
Enter port group view
Use the command...
display lldp local-information [ global |
interface interface-type interface-number ] [ |
{ begin | exclude | include }
regular-expression ]
display lldp neighbor-information [ brief |
interface interface-type interface-number
[ brief ] | list [ system-name system-name ] ]
[ | { begin | exclude | include }
regular-expression ]
display lldp statistics [ global | interface
interface-type interface-number ] [ | { begin |
exclude | include } regular-expression ]
display lldp status [ interface interface-type
interface-number ] [ | { begin | exclude |
include } regular-expression ]
display lldp tlv-config [ interface
interface-type interface-number ] [ | { begin |
exclude | include } regular-expression ]
Use the command...
system-view
interface interface-type interface-number
port-group manual port-group-name
lldp notification remote-change enable
quit
lldp timer notification-interval interval
176
Remarks
—
Required
Use either command.
Required
Disabled by default
—
Optional
5 seconds by default
Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view