Advertisement
Table of Contents
- 1 Package Contents
- 2 Minimum Requirements
- 3 Antenna Orientation
- 4 Hardware Overview
- 5 Led Behavior
- 6 Before You Start
- 7 Connect Your Router
- 8 Web Browser Configuration
- 9 Troubleshooting
- 10 GPL Code Statement
- 11 Gnu General Public License
- 12 Technical Support
- Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for D-Link AC5300
Summary of Contents for D-Link AC5300
-
Page 2: Package Contents
Package Contents DIR-895L AC5300 Ultra Wi-Fi Router Wi-Fi Configuration Card Power Adapter Quick Install Guide Ethernet Cable If any of the above items are missing, please contact your reseller. Minimum Requirements Network Requirements: • An Ethernet-based broadband modem Web-based Configuration Requirements Computer with the following: •... -
Page 3: Hardware Overview
Hardware Overview Connect a USB 3.0 flash drive or external hard drive to share content USB 3.0 Port throughout your network. Connect a USB 2.0 flash drive or external hard drive to share content USB 2.0 Port throughout your network. Press and hold the reset button with a paper clip for six seconds to reset the Reset Button router to the factory default settings. -
Page 4: Before You Start
Before You Start • Users with DSL providers - If you are using a PPPoE connection, you will need your PPPoE user name and password. If you do not have this information, contact your Internet provider. Do not proceed until you have this information. •... - Page 5 Unplug the power to your DSL or Cable modem. Connect an Ethernet cable from the Internet port of the router to the Ethernet port on your DSL or Cable modem. Ethernet Port DIR-895L Router Extender USB 3.0 USB2.0 RESET Ethernet POWER DC IN Modem Ethernet Cable...
-
Page 6: Web Browser Configuration
There are two ways to configure your router: A. Web Browser - Use a web browser from your computer. B. QRS Mobile app - Use a mobile device with the D-Link QRS Mobile app. Refer to the QRS Mobile Setup section for more information. - Page 7 Select a language and click Next to continue. The router may automatically detect your Internet connection type. If this happens, skip to step 6. If not, then select your Internet connection type and click Next to continue. DSL (PPPoE) users enter your PPPoE user name and password supplied by your ISP (Internet Service Provider).
- Page 8 If you have a Static IP connection, enter the IP information and DNS settings supplied by your ISP. Click Next to continue. For both the 2.4GHz and 5GHz bands, create a name for your Wi-Fi Network and a password. Your wireless devices (i.e., tablets, smartphones, and laptops) will need to have this information entered to be able to connect to your wireless network.
- Page 9 B. QRS Mobile Setup Scan the code below or search “QRS Mobile” (App Store or Google Play) to download the QRS Mobile App to your iPhone, iPad, or Android device. Android QRS Mobile App Once your app is installed, you may now configure your router. Connect to the router wirelessly by going to your wireless utility on your device.
-
Page 10: Troubleshooting
Troubleshooting How do I connect my wireless devices to the DIR-895L router? 1. Open your wireless network utility that displays available wireless networks. 2. Select the Wi-Fi Network name you assigned in the wizard and connect. Note: If you did not run the setup wizard or you reset the router to its default settings, refer to the Wi-Fi Configuration Card included for the default Wi-Fi Network Name and Wi-Fi Password. -
Page 11: Gpl Code Statement
Where such specific license terms entitle you to the source code of such software, D-Link will provide upon written request via email and/or traditional paper mail the applicable GPL and LGPLsource code files via CD-ROM for a nominal cost to cover shipping and media charges as allowed under the GPL and LGPL. -
Page 12: Technical Support
Version 1.00 October 19, 2015 D-Link and the D-Link logo are trademarks or registered trademarks of D-Link. All other third-party marks mentioned herein may be trademarks of their respective owners. Maximum wireless signal rate derived from IEEE Standard 802.11ac, 802.11g, and 802.11n specifications. Actual data throughput will vary.