Table of Contents
Advertisement
Major operating controls and their functions
MENU switch (MENU/A)
A menu will appear on the monitor screen when this
switch is pressed for about 5 seconds. This item can be
selected by pressing the switch while the menu is on the
screen.
ITEM/AWC switch (ITEM/AWC/S)
The item just below can be selected by pressing this
switch while the menu is on the screen. When the menu
is not displayed or the camera is in shooting mode, the
automatic white balance control can be set with this
switch.
YES/ABC switch (YES/ABC/+)
The Sub Menu for each item of the Main Menu is
displayed when this switch is pressed while the Main
Menu is on the screen.
While the Sub Menu is displayed, any setting can be
brought up to a higher value with this switch. When the
menu is not displayed or the camera is in shooting mode,
the automatic black balance control can be set with this
switch.
NO/BAR switch (NO/BAR/–)
The item just below can be selected by pressing this
switch while the Sub Menu is on the screen.
While the Sub Menu is displayed any setting can be
brought down to a lower value with this switch. When the
menu is not displayed or the camera is in shooting mode,
the color bar and the shooting conditions are alternately
indicated by pressing the switch.
Video output connector (VIDEO OUT)
A composite video signal is provided at this connector.
Iris connector (IRIS)
Input terminal for lens with an iris control function.
Pin No.
1
2
3
4
5
6
-12-
Signal
Pin No.
Return Control
7
Iris Follow
Not Used
8
Auto/Remote Control
GND
9
Auto/Manual Control
10
Iris Control
11
Lens Power
12
Signal
Not Used
Not Used
Not Used
Not Used
Advertisement
Table of Contents
