Advertisement
Remove or add Inserts to Cover as required.
Wash Cover with mild dish detergent solution and dry
with paper towel.
When Window has been assembled to Cover,
disassembly might damage Window. Therefore, before
installing Window, note the following:
a.
Check that Window display is correct for
job requirements.
b.
Check Window orientation to cover. Cover setpoint
and DAY/AUTO lever slots should be on the bottom.
a.
If using 14004065-XXX Window (with display),
leave Window out of cover, paint with approved
paint, and allow to dry. Proceed to Step 6.
b.
If using 14004066-XXX Window (blank
without logo), add window to Cover, paint with
and allow to dry. Painting is complete,
Home and Building Control
Honeywell Inc.
Honeywell Plaza
P.0. Box 524
Minneapolis, MN 55408-0524
or
with
Home and Building Control
Honeywell Limited-Honeywell Limit&
740 Ellesmere Road
Scarborough, Ontario
M1P 2V9
Rev. 2-W
6, Remove liner from adhesive on back of Window, Slide
Window into Cover opening (Fig. 11) and press in place.
Fig. 11. Installing Window.
Printed
in USA
WINDOW CURVED
FOR INSTALLATION
24106
Honeywell
Helping You Control Your World
Advertisement
