Advertisement
6. Engage bottom tab of manifold in slot on backplate and
push manifold straight onto backplate and airhead (Fig.
BOTTOM TAB--/
Fig. 6. Mounting Manifold to Backplate and Airhead.
7. Remove dust covers from Thermostats. With heating
Thermostat on left and cooling Thermostat on right,
engage center- and side-mounting ears and push
Thermostats straight onto manifold (Fig. 7).
Fig. 7. Mounting Thermostats onto Manifold.
8. Remove shipping stops from Thermostats. To install
cover, hook two slots on bottom of cover over tabs on
bottom of backplate. Swing cover up and over
thermostats (Fig. 8).
MANIFOLD
16800-l
9. Use Thermostat Tool to back setscrews at top of
backplate into holes in top of cover (Fig. 9).
THERMOSTAT
Fig. 9. Securing Cover to Backplate with Setscrews.
3
Fig. 8. Mounting Cover over Thermostats.
VER
16802-I
16803-l
Advertisement
