Side Lights - Siemens HB 76P.70 S Instruction Manual

Side lights

64
Only use 10 watt halogen bulbs.
Hold the halogen bulb with a clean, dry cloth. This will
increase its service life.
The left and right side lights are replaced in the same
way.
1. Switch off the circuit breaker in the fuse box.
2. Place a tea towel on the ceramic to prevent
damage.
3. Remove the glass cover. To do this, open the glass
cover from the bottom with your hand.
If it proves difficult to remove the glass cover, try
using a spoon. (Fig. A).
4. Pull out the bulb, rather than unscrewing it, (fig. B)
and replace with a bulb of the same type.
Make sure that the pins are in the correct position.
Push the bulb in firmly.
5. Refit the glass cover. Make sure that the curve in
the glass is on the side on which the bulb is
located.
Insert the glass cover at the top and press it down
firmly at the bottom until it engages. (Fig. C).
6. Remove the tea towel from the ceramic and switch
the circuit breaker back on.