Switching On And Off Automatically - Siemens HB 76P.70 S Instruction Manual

The cooking time has
elapsed
Cancelling the self cleaning
Calling up the time settings
Switching on and
off automatically
Example: self cleaning is to
be finished by 12:45.
52
A signal sounds. The oven stops heating.
The ? cooking time symbol flashes in the clock
display and 0:00 is displayed as the cooking time.
You can switch off the signal earlier by pressing the
j clock button.
Switch off the oven with the @ main switch.
Change the type of heating or switch off the oven with
the @ main switch.
The cleaning level cannot be changed.
To call up the ! End time or j Time:
Press the j clock button repeatedly until the relevant
symbol appears in the clock display.
The value is displayed for a few seconds.
Make the settings as described in steps 1 to 3. Set a
later end time before you start the oven.
4. Use the rotary knob to set a later end time.
5. Press the OK button to confirm.
The ! End time symbol lights up in the clock display
and the end time is displayed. When the oven starts,
the ? cooking time symbol lights up and you will see
the cooking time counting down.
The lift up floor function is locked at a given
temperature and the S padlock symbol appears in the
clock display.