Honeywell DOMONIAL User Manual page 16

ADDING, MODIFYING OR REMOVING TAGS
This function allows you to allocate TAGs to different users.
Select 2-TAGS and press
Enter the Master Code or present the Master TAG. The list of users is displayed.
TAGS
1- USER 1
2- CHRISTOPHER
3- VIRGINIA
4- WILLIAM
5- SOPHIE
6- ETC...
To assign a TAG to an existing user:
Select a user from the list with
The following screens are displayed.
Authorise the TAG
TAGS
ATTRIBUTE TAG TO
VIRGINIA
VIRGINIA
TAG ALLOWED?
SHOW YOUR TAG
CANCEL
NO YES
Press to validate each screen, or
Touch the Tag to the Tag Identification Area within 10 seconds.
A tone confirms that the tag has been recognised and added to your security
system.
When a new TAG is assigned to a user, it overwrites the existing tag.
►
To disable a TAG:
Select a user with
Pressing will disable this user's TAG.
If you disable a TAG, the name of the owner is struck through.
►
and confirm your choice with
Show the TAG Accept the TAG
ATTRIBUTE TAG TO
VIRGINIA
ACCEPT THE
NEW TAG?
NO
to cancel the operation.
and confirm your choice with
16
YES