Makita BTP131 Technical Information page 18

W
iring diagram
Fig. D-5
Put slack portion of
Lead wires from Stator
in this place.
Route Lead wires of Switch
units for detecting work mode
and the Lead wires from Stator
between these Ribs.
Route all of the Lead wires
within these ribs. Do not
let Lead wires cross the ribs
Ribs on Controller
Route Lead wires from Controller
to Terminal behind Ribs on
Controller.
Wiring in Housing L
Switch units for
detecting work mode
Stator
Switch
Rib
Rib
Rib
Controller
Terminal
P 18/ 18