Makita BTP131 Technical Information page 17

W
iring diagram
Fig. D-3
Rib C
Pass the Lead wires
between Rib A and Rib B,
and
between Rib C and Rib D.
Fig. D-4
Switch unit for detecting work mode
with Lead wires (red)
Switch unit for detecting work mode
with Lead wires (black)
Mount :
• Switch unit with Lead wires (red) to Pin
on Housing R side (red point mark side).
• Switch unit with Lead wires (black) to Pin
on the Housing L side.
Wiring of Lead wires of LED circuit
Rib A
Rib D
Rib B
Assembling Switch unit for detecting work mode
Impact Assembly viewed from Switch side
Fix Lead wires of LED circuit
with the Lead wire holder.
Do not let the Lead wires cross this Rib,
otherwise, Switch interferes with Housing R.
Lead wire holder
Housing R side
Red point
mark
Pin
Housing L side
P 17/ 18