Other Features; Set The Alarm Timer; Set The Sleep Timer; Play From An External Device - Philips DCM2055 User Manual

6 Other features

Set the alarm timer

This unit can be used as an alarm timer. You can
select CD, FM tuner, iPod/iPhone, or USB as
alarm source.
Note
‡
Make sure that you have set the clock correctly.
1
In standby mode, press and hold TIMER until
[SET TIMER] (set timer) scrolls on the display.
» [SELECT SOURCE] (select source) is
displayed.
2
Press SOURCE repeatedly or the source
selection buttons on the remote control to select
a source: disc, FM tuner, iPod/iPhone, or USB.
3
Press TIMER WR FRQÀUP
» The hour digits blink.
4
Press /
5
Press TIMER WR FRQÀUP
» The minute digits blink.
6
Repeat steps 4-5 to set the minute and
alarm volume.
Note
‡
If the system is in idle for 90 seconds, the unit exits
alarm setting mode automatically.
‡
If iPod/iPhone is selected as alarm source, and you have
created a playlist called "PHILIPS" in iTunes and import
it to your iPod/iPhone, you will wake to a random track
in the playlist.
‡
If no "PHILIPS" playlist is created in the iPod/iPhone or
no track is stored in the playlist, you will wake to your
last listened track in the iPod/iPhone.
To activate or deactivate the alarm timer,
In standby mode, press TIMER repeatedly to
activate or deactivate the alarm.
»
appears when the timer is activated.
Downloaded From Disc-Player.com Philips Manuals
repeatedly to set the hour.
Tip
‡
If CD/USB/iPod source is selected, but no disc is
inserted or no USB/ipod/iPhone connected, the unit
switches to the tuner source automatically.

Set the sleep timer

Note
‡
Make sure that you have set the clock correctly.
When the unit is turned on, press SLEEP
repeatedly to select the sleep timer period (in
minutes).
» When sleep timer is activated,
displayed.
Tip
‡
To deactivate the sleep timer, press SLEEP repeatedly
until [OFF] (off) is displayed.

Play from an external device

You can also listen to an external audio device
through this unit.
1
Connect the MP3 link cable (not supplied) to:
‡ the MP3 LINK connector (3.5mm) on
the unit.
‡ the headphone connector on an
external device.
2
Press MP3 LINK to select the MP3 link source.
3
Play the external device (see the device's
user manual).

Listen through the headphone

Plug a headphone into the
is
socket on the unit.
EN 17