Listen To Fm Radio; Tune To Fm Radio Stations; Program Fm Radio Stations Automatically; Program Fm Radio Stations Manually - Philips DCM2055 User Manual

5 Listen to FM
radio

Tune to FM radio stations

Note
‡
Position the antenna as far as possible from TV, VCR, or
other radiation source.
‡
Ensure that you have connected and fully extended the
supplied FM antenna.
1
Press FM to select FM tuner mode.
2
Press and hold
» [SEARCH] (search) is displayed.
» The unit tunes to an FM station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
To tune to a weak station:
Press / UHSHDWHGO\ XQWLO \RX ÀQG RSWLPDO
reception.
Program FM radio stations
automatically
Note
‡
You can program a maximum of 20 preset FM radio
stations.
In FM tuner mode, press and hold PROG for 3
seconds.
» [AUTO] (auto) is displayed.
» The unit stores all the FM radio
stations automatically and then
EURDGFDVWV WKH ÀUVW SUHVHW UDGLR
station.
16 EN
Downloaded From Disc-Player.com Philips Manuals
/ for 3 seconds.
Program FM radio stations
manually
1
In tuner mode, tune to an FM radio station.
2
Press PROG to activate programming
mode.
» [PROG] (program) blinks.
3
Press / repeatedly to select a channel
number.
4
Press PROG DJDLQ WR FRQÀUP
5
Repeat steps 1-4 to store other FM
stations.
Note
‡
To remove a pre-stored station, store another station
in its place.

Select a preset radio station

In tuner mode, press
buttons to select a preset number.

Select stereo/mono broadcast

Note
‡
Stereo broadcast is the default setting for tuner mode.
‡
For stations with weak signals: to improve the reception,
change to monaural sound.
In FM tuner mode, press OK to switch between
mono and stereo broadcast.
/ or the numeric