Start/Stop Button; Menu Button; Timer Buttons - Black & Decker B2200 Quick Start Manual

3.
loaf Size button
Press to select the loaf size (1.5-lb. or 2.0-lb.).
4.

Start/Stop button

Press to begin the cycle and to display the total time for the
selected bread to be completed. To cancel the cycle, press
and hold for about 3 seconds until you hear a beep. The unit
beeps to indicate that it has stopped.
Important: do not press Stop when checking the progress
of the bread; it will cancel the program. Once a cycle is
canceled, you will have to start over again.
5.

Menu button

Press this button to select the program you want. A beep
sounds each time you press the button.
6.

Timer buttons

Press these buttons to set the time for delay bake (for
program settings 1, 4, 5, 8 and 9). For example, you can time
your bread to be ready for dinner or when you wake up in the
morning. Set it by selecting how much time you want to pass
before the bread is completed. For example, if it is 8:00 p.m.
and you want the bread to be ready at 7:00 a.m., set it for
11 hours.
You can also use these buttons to adjust the time of the cycle.
They adjust up or down in 10-minute increments. Changes
must be made before the unit begins operation.
9