Modify Channel Settings; Change Roaming Settings; Connect To An Ethernet Network; How To Connect To Virtual Private Networks - Honeywell DOLPHIN CT50 User Manual

Chapter 6 — Configure the Computer

Connect to an Ethernet Network

How to Connect to Virtual Private Networks

62 Dolphin CT50 Mobile Computer with Windows 10 IoT Mobile Enterprise User Guide

Modify Channel Settings

You can manually select the channels the 802.11 radio uses for
communication.
1 Tap All Apps > Settings > Extras > Wi-Fi Radio Settings.
2 Tap Channel Settings.
3 Swipe left or right to view the channels available under the 2.5 GHz,
5 GHz, and DFS bands.
4 Select the boxes next to the channels to enable or disable them.
5 Tap to save the settings.

Change Roaming Settings

By default, roaming is enabled for the 802.11 radio. When enabled, the
Wi-Fi radio automatically roams from one access point to another as
needed to provide seamless connectivity.
1 Tap All Apps > Settings > Extras > Wi-Fi Radio Settings.
2 Tap Roaming Settings.
3 Tap the Roaming check box to disable roaming.
4 Tap to save the settings.
By default, the CT50 is configured to obtain IP addresses automatically
through the DHCP server. In most cases, you can simply insert the CT50
into an Ethernet dock and connect to the Ethernet network. To connect
the computer to an Ethernet network, you need an Ethernet dock.
1 Make sure the dock is connected to your Ethernet network.
2 Place the computer in the dock.
3 Tap All Apps > DiagnosticInfoW10 to view the assigned IP
address.
The computer supports connecting to virtual private networks (VPNs).
To configure VPN access, you must obtain details from your network
administrator. To establish a VPN connection, you must first create a
VPN profile on the CT50.