Symbology Settings; Profile Settings For Scandemow10 - Honeywell DOLPHIN CT50 User Manual

Chapter 3 — About the Scanner
Profile Settings and Descriptions
Profile
HON:Reset
HON:EnablePreviewOnDecode
36 Dolphin CT50 Mobile Computer with Windows 10 IoT Mobile Enterprise User Guide
Scan Settings and Descriptions (continued)
Scan Setting
Scan Mode
Automatic Interval

Symbology Settings

The Symbology Settings define the bar code symbologies the scanner
will decode with the ScanDemo app.
• Touch the toggle box next to a symbology to enable or disable it.
• Swipe up or down to scroll through the list of available symbologies.
For a complete list of all available symbologies, see Appendix A,
"Specifications" on page

Profile Settings for ScanDemoW10

The built-in Point of Service (POS) profiles are applied by the
ScanDemoW10 app using the Microsoft POS application program
interface (API), ClaimedBarcodeScanner.SetActiveProfileAsync. This
API sets the active profile on the CT50 bar code scanner. The profile
strings defined by the \Documents\Profile\
HoneywellDecoderSettingsv2.exm file are returned to the app using
BarcodeScanner.GetSupportedProfiles. It gets the list of profiles
supported by the bar code scanner.
Description
There are three options for scan mode:
• Normal: Normal mode requires you to press
Scan or one of the Scan buttons between
each scan.
• Automatic: Automatic mode activates the
scanner for continuous scanning without
requiring you to touch Scan on the screen
each time.
• Continuous: Continuous mode activates the
scanner only when you touch and hold one of
the Scan buttons.
Adjusts the automatic interval from 0 to 30
seconds between each scan.
75.
Description
Resets all symbology settings to disabled.
Profile not supported in ScanDemoW10.