Makita DP4011 Technical Information page 4

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Gear Section (Cont.)
ASSEMBLING
1) Insert the arms of Change plate B through the slots in Rack 12, and then put Spur gear 29-37 between the arms of
Change plate B. (Fig. 9)
2) Insert the Pin 4 into Rack 12. Install Spur gear 29-37 to Spindle together with the parts you have assembled to Rack 12.
(Fig. 10)
At this time, do not fail to set Leaf spring in place. (Fig. 10)
Fig. 9
Rack 12
arm
Change plate B
3) Push Rack 12 into Gear housing until it stops.
And then, install Change lever B on Gear housing
with its "I" mark which indicates low speed aligned
with the triangular mark on Gear housing. (Fig. 11)
4) Install Lock plate on Gear housing with its tail portion
inserted between the ribs on Gear housing as
illustrated in Fig. 11.
5) Assemble Gear complete with Ball bearing 606ZZ
to Gear housing as illustrated in Fig. 6.
Fig. 10
Spur gear 29-37
Fig. 11
Spur gear 29-37
Change lever B
Align
Gear housing
Leaf spring
Spindle
Lock plate
with I.
P 4 / 8
Spur gear 29-37
Pin 4
Rack 12
with change plate B
Spindle
Rack 12
Ribs