Makita BTM40 Technical Information page 7

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -3. Switch Lever
ASSEMBLING
Mount Switch lever and Switch knob on Motor housing. (Fig. 10)
Fig. 10
1. Make sure Compression spring 5 is
mounted on the back of Switch lever.
Compression spring 5
3. Pressing Switch lever against Motor housing, insert the locking claws of Switch knob into the locking hole of
Switch lever.
Switch lever
locking hole
Motor housing
Switch knob
locking claw
2. Bending the rear end of Switch lever, slide Switch lever into
Motor housing as drawn below.
Switch knob's locking claws,
locked in place
P 7/10