Black & Decker 3339-220 3.0 H.P Instruction Manual page 7

154708/3339-220 rtr 5/17/02 2:36 PM Page 3
Figure 1
COLLET NUT
1/2"
SPINDLE LOCK BUTTON
HEIGHT STOP THUMB
WHEEL
Figure 3
QUICK RELEASE BUTTON
Figure 2
Collets
PLUNGE RELEASE LEVER NEVER TIGHTEN THE COLLET ON THIS TOOL WITHOUT FIRST INSTALLING
A ROUTER BIT IN IT. TIGHTENING AN EMPTY COLLET CAN DAMAGE THE
COLLET.
To change collets, unscrew the collet assembly, as described above, sharply
pull the old collet out of the collet nut and insert the new collet. Push firmly
so that it snaps past the retainer spring in the collet nut.
Controls
IMPORTANT NOTE: Before operating any of the controls, read this whole
section.
3