Honeywell Excel 50 User Manual page 52

EN2B-0137GE51 R0216
IMPORTANT
If more than one Excel 50 Controller with the same application program is
connected to the C-Bus, the user addresses must have the bus numbers
appended to them.
Using the arrow keys, move the cursor to 'NEXT'. Confirm with ENTER.
›CONFIG
C1›-1 C2›-1
C3›-1 C4›-1
C5›-1 C6›-1
In this screen, the codes of the configurable application can be changed. The
application codes can be generated with the 'LIZARD-Excel 50 Application Selector'.
This screen does not appear with standard and custom CARE applications.
NOTE: Not all applications have six configuration code numbers. Applications with
eight configuration codes have two on a second screen as shown below.
First screen:
C1›-1 C2›-1
C3›-1 C4›-1
C5›-1 C6›-1
›NEXT
Second screen:
›CONFIG
C7›-1 C8›-1
NOTE: If the 'LIZARD-Excel 50 Application Selector' is not available, please
contact your local Honeywell branch for support.
Using the arrow keys, move the cursor to the appropriate code and change its value
using the '+' and '–' keys.
Using the arrow keys, move the cursor to the 'CONFIG' field. Confirm with ENTER.
If the codes entered in the screen are allowed, the default screen of normal
operation will appear:
52
EXCEL 50 - USER GUIDE
This screen appears in
configurable applications only.