Selecting the input source and favorite settings with one touch (SCENE)
The SCENE function allows you to select the assigned input source, sound program, HDMI output and various settings with just one touch.
You can use up to 12 scenes to register your favorite settings and switch them depending on a playback source.
1
Press SCENE.
The input source and settings registered to the corresponding scene are selected. The unit turns on automatically when it is in standby mode.
By default, the following settings are registered for each scene.
SCENE (SCENE key)
Input (p.57)
Input
Audio Select (p.98)
HDMI Output
HDMI Output (p.57)
DSP Program (p.60)
Pure Direct Mode (p.117)
Mode
Enhancer (p.65)
Enhancer Hi-Res Mode (p.98)
X
You can select SCENE 1-4 by pressing SCENE on the remote control. Additionally, you can create 8 scenes (SCENE 5-12) and select those scenes from the "Scene" menu (p.102).
On-screen scene selection
a Press ON SCREEN.
b Use the Cursor keys to select "Scene" and press ENTER.
c Use the Cursor keys to select a desired scene and press ENTER.