Multi-Zone Output - Yamaha AVENTAGE RX-A1060 Owner's Manual

Multi-zone output

Video/audio signals that can be output to Zone2 vary depending on how you connect the
device in Zone 2 to the unit's output jacks.
⬛
Audio output
Using the unit's
internal amplifier
(p.26)
In \ Zone2 Out EXTRA SP jacks
m (*2)
Digital audio (HDMI)
Digital audio
m(*4)
(COAXIAL/OPTICAL)
m
Analog audio (AUDIO)
m
USB (*5)
m
Network sources (*5)
m
TUNER
m: Available
*1 Available when "HDMI OUT2 Assign" (p.125) in the "Setup" menu is set to "Zone2" (Audio
Output: On)
*2 Available when 2-channel PCM signals are input (stereo output [down mixed to 2-channels]
when the input source selected in the main zone is selected)
Available when "HDMI OUT2 Assign" (p.125) in the "Setup" menu is set to "Zone2"
*3 Available when 2-channel PCM signals are input (stereo output [down mixed to 2-channels]
when the input source selected in the main zone is selected)
*4 Available when 2-channel PCM signals are input
*5 To play back DSD audio in Zone2, select "Main Zone Sync" as the Zone2 input with the web
control (p.91) or use the party mode (p.89).
Using an external amplifier (p.85)
HDMI OUT 2
ZONE OUT jacks
(ZONE OUT) jack (*1)
m (*2) m (*3)
m (*4)
m
m
m
m
En
⬛
Video output
MONITOR OUT/ZONE OUT jacks (*6)
In \ Zone2 Out
COMPONENT VIDEO
HDMI video
m
Component video
Composite video
m: Available
*6 Available when "Monitor Out Assign" (p.125) in the "Setup" menu is set to "Zone2"
*7 Available when "HDMI OUT2 Assign" (p.125) in the "Setup" menu is set to "Zone2"
152
HDMI OUT 2 (ZONE OUT) jack
(*7)
VIDEO
m
m