Apr Ring Mode Assignment - NEC Xen IPK Programming Manual

Xen IPK

APR Ring Mode Assignment

General Description
Use this Memory Block to specify the ringing mode for an Single Line Telephone connected to
the APR-U.
Display
Tel Port No.
Data
(01~99)
No.
A0~C0
0 1 / 3 9 : A D A
T I M E
Settings
LK 1 LK 2
Station
No Ring Number
only
LK 5 LK 6
Programming Procedures
1 Go off-line.
2 Press LK4 + CI to access the Memory Block.
3 Press the corresponding CO/PBX line key to change data option.
Note: Use the following to enter data:
R
select next Tel Port No.
N
4 Press to write the data.
P
5 Press to go back on-line.
Related Programming
No related programming is necessary for this Memory Block.
N
1. No Ring means that no calls ring at the Single Line Telephone.
2. Station Number ring means that only calls directed to the Multiline Terminal Station Number, ring at the Single
Line Telephone.
3. All Ring means that all calls that ring at the Multiline Terminal also ring at the Single Line Telephone.
4. Telephone ports A0~C0 are ports 100~120.
4-39, APR Ring Mode Assignment
Setting
Title
Data
2 = S T A
D I S P L A Y
LK 3 LK 4
All Ring
The shaded area indicates
the default setting.
LK 7 LK 8
Programming Manual
4-39
System Mode
4
Submode
—
Data No.
39
PC Programming
+ BTM
DRAFT 3
Chapter 1 – 445