Table Of Contents; Parts List; Assembly - Orion SKYWATCHER 9024 Instruction Manual

C
ongratulations on your purchase of a quality Orion telescope. Your new Skywatcher 90mm EQ
Refractor is designed for high-resolution viewing of astronomical objects. With its precision optics and
equatorial mount, you'll be able to locate and enjoy hundreds of fascinating celestial denizens, including
the planets, Moon, and a variety of deep-sky galaxies, nebulas, and star clusters.
If you have never owned a telescope before, we would like to welcome you to amateur astronomy. Take
some time to familiarize yourself with the night sky. Learn to recognize the patterns of stars in the major
constellations; a star wheel, or planisphere, available from Orion or from your local telescope shop, will
greatly help. With a little practice, a little patience, and a reasonably dark sky away from city lights, you'll
find your telescope to be a never-ending source of wonder, exploration, and relaxation.
These instructions will help you set up, properly use, and care for your telescope. Please read them over
thoroughly before getting started.

Table of Contents

1. Parts List............................................................................................................................... 3
2. Assembly .............................................................................................................................. 3
3. Balancing the Telescope....................................................................................................... 4
4. Aligning the Finder Scope .................................................................................................... 5
5. Setting Up and Using the Equatorial Mount......................................................................... 5
6. Using Your Telescope-Astronomical Observing.................................................................... 7
7. Astrophotography ................................................................................................................. 9
8. Terrestrial Viewing................................................................................................................. 10
9. Care and Maintenance ......................................................................................................... 10
10. Specifications........................................................................................................................ 10

1. Parts List

Qty. Description
1 Optical tube assembly
1 German-type equatorial mount
2 Slow-motion control cables
1 Counterweight
1 Counterweight shaft
3 Tripod legs
1 Accessory tray with mounting hardware
1 Accessory tray bracket
2 Optical tube mounting rings (located on optical tube)
1 6x30 achromatic crosshair finder scope
1 Finder scope bracket
1 Mirror star diagonal (1.25")
1 25mm (36x) Kellner eyepiece (1.25")
1 10mm (91x) Kellner eyepiece (1.25")
1 Objective lens dust cap
4 Assembly Tools (2 wrenches, Phillips-head screwdriver,
flat-head screwdriver key)
WARNING:
Never look directly at the Sun
through your telescope or its finder scope-
even for an instant-without a professionally
made solar filter that completely covers the
front of the instrument, or permanent eye
damage could result. Young children should use
this telescope only with adult supervision.

2. Assembly

Carefully open all of the boxes in the shipping container. Make
sure all the parts listed in Section 1 are present. Save the boxes
and packaging material. In the unlikely event that you need to
return the telescope, you must use the original packaging.
Assembling the telescope for the first time should take about
20 minutes. No tools are needed other than the ones provid-
ed. All bolts should be tightened securely to eliminate flexing
and wobbling, but be careful not to over-tighten or the threads
may strip. Refer to Figure 1 during the assembly process.
During assembly (and anytime, for that matter), DO NOT touch
the surfaces of the telescope objective lens or the lenses of the
3