Page 1
Cordless Driver Drill MODEL 6327D MODEL 6328D 004544 I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
The noise level under working may exceed 85 dB (A). Director – Wear ear protection. – MAKITA INTERNATIONAL EUROPE LTD. The typical weighted root mean square acceleration Michigan Drive, Tongwell, Milton Keynes, Bucks MK15 value is not more than 2.5 m/s...
Page 3
17. Stay alert. caught in moving parts. Non-skid footwear is recom- mended when working outdoors. Wear protecting Watch what you are doing. Use common sense. Do hair covering to contain long hair. not operate the tool when you are tired. Use protective equipment.
IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CARTRIDGE ENC004-1 Before using battery cartridge, read all instruc- (1) Do not touch the terminals with any con- tions and cautionary markings on (1) battery ductive material. charger, (2) battery, and (3) product using bat- (2) Avoid storing battery cartridge in a con- tery.
FUNCTIONAL CAUTION: DESCRIPTION • Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge 002051 • Always switch off the tool before insertion or removal of the battery cartridge.
Speed change 002096 To change the speed, first switch off the tool and then slide the speed change lever to the “II” side for high speed or “I” side for low speed. Be sure that the speed change lever is set to the correct position before operation. Use the right speed for your job.
OPERATION Screwdriving operation 002134 CAUTION: • Adjust the adjusting ring to the proper torque level for your work. Place the point of the driver bit in the screw head and apply pressure to the tool. Start the tool slowly and then increase the speed gradually. Release the switch trigger as soon as the clutch cuts in.
CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.