Table of Contents
Advertisement
10. Install:
• Cover (idle gear 1) "1"
• Bolt "2"
Bolt:
10 Nm (1.0 m•kg, 7.2
ft•lb)
Install the cover (idle gear 1) with its
mark "a" facing upward.
11. Connect:
• AC magneto lead
Refer to "CABLE ROUTING DIA-
GRAM" section in the CHAPTER
2.
12. Install:
• Shift pedal "1"
• Bolt (shift pedal) "2"
Bolt (shift pedal):
12 Nm (1.2 m•kg, 8.7
ft•lb)
When installing the shift pedal onto
the shift shaft, be sure that the center
of the shift pedal is about 5.1 mm (0.2
in) "a" above the top of the footrest.
AC MAGNETO AND STARTER CLUTCH
5-52
Advertisement
Table of Contents
