Honeywell W8665A Manual page 6

W8665A,E RF RECEIVER MODULE
M1 M4 M6 C R Y W G
EMM-3
1
FACTORY INSTALLED JUMPER.
THE THREE RZ TERMINALS ARE INTERNALLY CONNECTED.
Fig. 7. Connecting the W8665E RF Zone™ Panel to the EMM-3 MiniZone™ Panel to control 1H/1C with up three
R C E W1 Y1 G W2 Y2 O B L
EMM-3U
1
2
Fig. 8. Connecting the W8665E RF Zone™ Panel to the EMM-3U Zone Control Panel to operate up to 2H/2C with
69-1630-1
T8665A
ZONE 1
THERMOSTAT
COMM ZONE 1 ZONE 2
LED LED LED
LED STATES:
COMM:
RAPIDLY FLASHING GREEN – RECEIVING INFORMATION FROM THERMOSTAT.
GREEN OFF – STANDBY, READY TO RECEIVE INFORMATION.
ZONE:
RED ON – SYSTEM (HEAT, COOL OR FAN) IS ON.
RED OFF – SYSTEM (HEAT, COOL OR FAN) IS OFF.
FLASHING RED – ERROR. NOT RECEIVING SIGNAL FROM THERMOSTAT.
RAPIDLY FLASHING RED – RECEIVER IN SET-UP MODE.
DIP SWITCH SETTINGS:
OFF: NOT SET-UP TO RECEIVE INFORMATION FROM A THERMOSTAT.
ON: READY TO RECEIVE INFORMATION FROM THERMOSTAT AFTER
SET-UP IS COMPLETE.
SET-UP:
MOVE DIP SWITCH TO ON POSITION AND MAKE THERMOSTAT CALL FOR FAN.
NOTE: ALL OTHER THERMOSTATS MUST BE OFF (NOT CALLING) DURING SET-UP.
ZONE 1
Y W G
M1 M4 M6 C R Y W G
thermostat zone connections.
ZONE 1
Y W G
W8665E
2
FACTORY INSTALLED JUMPER.
THE THREE RZ TERMINALS ARE INTERNALLY CONNECTED.
LEAVE O/B JUMPER DISCONNECTED ON EMM-3U BOARD.
up to three thermostat zone connections.
T8665A
ZONE 2
THERMOSTAT
ZONE 3
LED
ZONE 2 ZONE 3
Y W G Y W G
M1 M4 M6 C R Y W G
ZONE 2
Y W G
R C E W1 Y1 G W2 Y2 O B L
2
6
T8665A
ZONE 3
THERMOSTAT
W8665E
ON
ZONE 1
ZONE 2
ZONE 3
R C RZ RZ RZ
1
R
C
24V, 40 VA TRANSFORMER
ZONE 3
R C RZ RZ RZ
Y W G
1
R C E W1 Y1 G W2 Y2 O B L
2
24V, 40 VA
TRANSFORMER
C R
M20164B
R
C
C R
M20571A