Load Balance - Draytek Vigor2925 Series User Manual

4 . 1 5 . 6 L o a d B
4 . 1 5 . 6 L o a d B
The parameters configured for Load Balance can help to distribute the traffic for all of the
access points registered to Vigor router. Thus, the bandwidth will not be occupied by certain
access points.
Available settings are explained as follows:
Item
Enable
Mode
Force Overload
Disassociation
Vigor2925 Series User's Guide
a l a n c e
a l a n c e
Description
Check the box to enable such function.
It is used to determine the operation mode when the system
detects overload between access points.
By Station Number –The operation of load balance will be
executed based on the station number configured in this page.
It is used to limit the allowed number for the station connecting
to the access point. The purpose is to prevent lots of stations
connecting to access point at the same time and causing traffic
unbalanced.
By Traffic – The operation of load balance will executed
according to the traffic configuration in this page.


By Idle Time - When the access point is overload (e.g.,
reaching the limit of station number or limit of network
traffic), it will terminate the network connection of the client's
station which is idle for a longest time.
By signal Strength - When the access point is overload (e.g.,
reaching the limit of station number or limit of network
traffic), it will terminate the network connection of the client's
Upload Limit –Use the drop down list to specify the traffic
limit for uploading.
Download Limit – Use the drop down list to specify the
traffic limit for downloading.
410