Wan Budget - Draytek Vigor2925 Series User Manual

4 . 1 . 5 W
4 . 1 . 5
This function is used to determine the data traffic volume for each WAN interface respectively
to prevent from overcharges for data transmission by the ISP. Please note that the Quota Limit
and Billing cycle day of month settings will need to be configured correctly first in order for
some period calculations to be performed correctly.
G e n e r a
G e n e r
Click WAN1/WAN2/WAN3/WAN4 link to open the following web page.
Available settings are explained as follows:
Item
Enable
Quota Limit
When quota exceeded
Vigor2925 Series User's Guide
A N B u d g e t
W A N B u d g e t
l S e t u p
a l S e t u p
Description
Check the box to enable such function.
Type the data traffic quota allowed for such WAN
interface. There are two unit (MB and GB) offered for you
to specify.
Check the box(es) as the condition(s) for the system to
perform when the traffic has exceeded the budget limit.
Shutdown WAN interface – All the outgoing traffic
through such WAN interface will be terminated.
Send Mail Alert to Administrator – The system will send
out a warning message to the administrator when the quota
184