Honeywell 70e-BTSC Quick Start Manual page 8

Option 2
The DIN rail slot on the bottom panel enables secure mounting to a
horizontal surface using the optional Din rail.
Hardware Required
• DIN rail
• 3/16 in. dia. x 5/8 in. long pan head screw
• 1/2 in. OD x 7/32 in. ID x 3/64 in. thick flat washer
• 3/16 in. dia. nut
Installation
1. Slide the DIN rail into the DIN rail slot (7.5 X 35 mm) on the bot-
tom of the QuadCharger.
2. Then, using the appropriate hardware above, secure the DIN rail
to the desktop.