External Speaker - Cobra 25 LTD Installation Instructions Manual

Operation

External Speaker

External Speaker
The external Speaker jack is used for remote
receiver monitoring.
Note
The external speaker should
have 8-ohm impedance and be
rated to handle at least 4.0
watts. When the external speak-
er is plugged in, the internal
speaker is automatically discon-
nected.
Note
Cobra external speakers are
rated at 10 watts.
1 Connect an external speaker to the external
speaker jack on the rear panel.
PA (Public Address)
Connect an external PA speaker to the PA jack
1
on the rear panel.
2
Set CB/ANL PA switch to PA position.
Operation
PA (Public
Address)
Note
Speaker should have 8-ohm
impedance and be rated to
handle at least 4.0 watts.
Note
The speaker should be directed
away from the microphone to
prevent acoustic feedback.
Note
When the volume control is
rotated clockwise, activity on
the CB channel will be heard
through the PA speaker.