NETGEAR C6300 User Manual page 53

These addresses are part of the designated private address range for use in private networks
and are suitable for most applications. If your network requires a different IP addressing
scheme, you can change these settings.
You might want to change these settings if you need a specific IP subnet that one or more
devices on the network use, or if you use competing subnets with the same IP scheme.
To change the LAN TCP/IP settings:

1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. Type http://routerlogin.net.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup.
5. In the IP Address field, type the IP address.
6. In the IP Subnet Mask field, type the subnet mask of the modem router.
The IP address and subnet mask identify which addresses are local to a specific device
and which must be reached through a gateway or modem router.
7. Click the Apply button.
Your settings are saved.
If you changed the LAN IP address of the modem router, you are disconnected when this
change takes effect.
To reconnect, close your browser, relaunch it, and log in to the modem router.
AC1750 WiFi Cable Modem Router
Specify Network Settings
53