Changing The Remote Sensor Mode - Canon MVX150i Instruction Manual

3_D74PAL_E(42-86)

Changing the Remote Sensor Mode

Two remote sensor modes and an off setting are available to prevent interference
from other Canon wireless controllers being used nearby.
Turning the Remote Sensor Off
CAMERA
( 42)
Open the menu and select [SYSTEM]. Select [WL.
REMOTE], set it to [OFF B] and close the menu.
"B" appears.
Changing the Remote Sensor Mode
CAMERA
( 42)
1. On the camcorder, open the menu and select
[SYSTEM]. Select [WL. REMOTE], set it to [A 2] and
close the menu.
The selected mode appears for 4 seconds.
2. On the wireless controller, press and hold the
REMOTE SET button. Press the ZOOM
mode 2. Keep the button pressed for over 2 seconds.
If you have set the camcorder to mode 1, press the ZOOM
button for mode 1.
❍ The wireless controller returns to mode 1 when you
❍ Make sure that camcorder and wireless controller are set to the same mode.
Downloaded From CamcorderManual.com Canon Manuals
03.1.27 7:27 PM
PLAY (VCR)
SYSTEM
PLAY (VCR)
SYSTEM
replace the batteries. Change the mode if necessary.
Display the camcorder's mode by pressing any button on the wireless controller
(except of the REMOTE SET button) and set the wireless controller's mode to
the same mode. Change the batteries if the wireless controller still does not
work.
Page 47
CARD CAMERA
WL.REMOTE•••• 1
CARD CAMERA
WL.REMOTE•••• 1
T
button for
W
E
CARD PLAY (VCR)
CARD PLAY (VCR)
AUDIO DUB. PAUSE SLOW 2
AV INSERT AV DV REMOTE SET
REC
PAUSE
WIRELESS CONTROLLER WL - D79
START
ZOOM
/STOP PHOTO W T
SELF T. D.EFFECT. MENU
ON/OFF SET
TV SCREEN
47