Yamaha YDRE Owner's/Operator's Manual page 49

MAINTENANCE
1
2
3
4
5
6
7
8
9
10
11
7-21
B
Y-1968 Y-1968
Y-1969
2. If the free play distance needs
adjusting, loosen the lock nut å
A
and turn the adjusting nut ∫ in
or out until the free play
specification is met. Then tighten
the lock nut in place.
Y-2281
Do not over-tighten the brake
cables. Over-tightening will
increase brake wear and affect
overall performance of PTV.
Premature brake wear can result.
Death or serious personal injury
can result from failing to comply
with the warning labels in this
manual.
Replacing a Headlight
Bulb
If the headlight burns out replace it
as follows:
1. Remove the bulb holder 1 and
bulb 2 by removing the three
screws 3 located on the back of
the bezel 4.
2. Disconnect the wire connectors
from the bulb.
Y-1970 3. Remove the two screws 5
located on the side of the bulb
holder 1 to gain access to the
headlight bulb 2.
4. Insert a new bulb 2 into the
bulb holder 1 and secure with
the two bulb holder screws 5.
Torque to 3 ~ 4.5 Nm,
0.3 ~ 0.45 m•kg (27 ~ 40 in•lb).
5. Reattach the bulb holder 1 to
the bezel 4 and torque to
3 ~ 4.5 Nm, 0.3 ~ 0.45 m•kg
(27 ~ 40 in•lb).
JC1