NETGEAR R6300v2 User Manual page 90

• Status. The link status of the port.
• TxPkts. The number of packets transmitted on this port since reset or manual clear.
• RxPkts. The number of packets received on this port since reset or manual clear.
• Collisions. The number of collisions on this port since reset or manual clear.
• Tx B/s. The current transmission (outbound) bandwidth used on the WAN and LAN
ports.
• Rx B/s. The current reception (inbound) bandwidth used on the WAN and LAN ports.
• Up Time. The time elapsed since this port acquired the link.
• Poll Interval. The interval at which the statistics are updated in this screen.
To change the polling frequency, enter a time in seconds in the Poll Interval field and click
Set Interval.
To stop the polling entirely, click Stop.
Connection Status Button
To view the Internet connection status:

1. Select ADVANCED Home or select Administration > Router Status.
2. In the Internet Port pane, click the Connection Status button.
The following information displays:
• IP Address. The IP address that is assigned to the router.
• Subnet Mask. The subnet mask that is assigned to the router.
• Default Gateway. The IP address for the default gateway that the router
communicates with.
• DHCP Server. The IP address for the Dynamic Host Configuration Protocol server
that provides the TCP/IP configuration for all the computers that are connected to the
router.
• DNS Server. The IP address of the Domain Name Service server that provides
translation of network names to IP addresses.
R6300v2 Smart WiFi Router
Administration
90