Drive Select Switch - Yamaha YTF2E Owner's/Operator's Manual

REV
BEEP
REV
REV
JW3
FWD OFF ON ON
Y-2379
Y-2380
FWD ON
OFF ON
Y-2389
FWD OFF ON ON
Y-2392
CONTROLS

DRIVE SELECT SWITCH

The drive select switch is used to
shift the utility vehicle into forward or
reverse. After coming to a complete
stop, move the switch to the desired
position.
Switch Position
FWD
REV
TIP
The reverse alarm will sound when
the drive select switch is turned to
"REV."
BATTERY GAUGE
The battery gauge displays how much
charge is left in the batteries å.
When the batteries are at full charge,
all the LEDs will be lit.
As the battery energy decreases, the
LEDs will move to the left toward the
"E." When the LED light below the "E"
is the only one lit, the batteries must
be charged.
Car Movement
FORWARD
REVERSE
4-3
1
2
3
4
5
6
7
8
9
10
11