To Use Slip Mode - Pioneer REKORDBOX Operating Instructions Manual

Saving hot cue
1 Click the [HOT CUE] mode button.
The panel is changed to Hot Cue mode.
2 Move the current playback position to the point you wish to set a hot cue.
3 Click a performance pad where no hot cue is assigned.
A hot cue is assigned to the pad you clicked.
When a loop is playing, the loop is assigned and saved as a hot cue.
You cannot assign a new hot cue to the pad where another hot cue is already assigned. You
need to delete the existing hot cue to assign a new one. How to delete a hot cue is described
below.
Calling hot cue and starting to play
1 Click the [HOT CUE] mode button.
The mode turns to Hot Cue Mode.
2 Click any performance pad while the deck is playing a track or on pause.
The hot cue saved in the pad is called up and playback is started.
After calling up the loop assigned to the performance pad button, you can cancel the loop
playback or change the length of the loop.
Deleting hot cues
1 Click the [HOT CUE] mode button to change the mode.
The mode turns to Hot Cue Mode.
2 Click the [x] button in the upper right of the performance pad button of the hot
cue you wish to delete.
The hot cue is deleted and the pad button becomes empty.
5.3.8

To use slip mode

When the slip mode is turned on, even during you perform scratching, looping and hot cue
play, the track continues to play in the background. When you finish your performance, the
track resumes to play in the foreground as if the track skips time during which you performed.
Using this function, various performance can be achieved without breaking the original tempo
and musical proceedings.
You can perform the followings in the slip mode:
1. Hot Cue
164