Setting Cue Or Loop Points - Pioneer REKORDBOX Operating Instructions Manual

4.6

Setting cue or loop points

This section describes how to set cue and loop points.
Setting cue points
1 Click [ ] during playback.
Playback pauses.
2 Click [CUE].
The cue point is set. The [CUE] button lights up.

To start playback from the cue point, click [

When a new cue point is set, the previous cue point is deleted.

When a different music file is loaded, the previous cue point is canceled.

It is also possible to save cue points.
Returning to a cue point (Back Cue)
Click [CUE] during playback.
The track returns to the cue point and pauses. The [CUE] button lights.
 To start playback from the cue point, click [
Checking a cue point (Cue Point Sampler)
After returning to the cue point, long-click the [CUE] button.
Playback starts from the cue point.
Playback continues while [CUE] is pressed. When released, playback returns to the cue point
and pauses.
Setting cue point during playback (Real Time Cue)
Click the [LOOP IN] button during playback at the position you wish to set the cue
point.
The point you clicked is set as a cue point.
].
].
84