Fan Module Installation; Installation Guidelines - Cisco Catalyst 3650 Hardware Installation Manual

Fan Module Installation

Figure 4-1
1
2
Fan Module Installation

Installation Guidelines

Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Fans should be removed or installed only when StackWise adapters or StackWise adapter blanks are
Note
installed in each port.
Observe these guidelines when removing or installing a fan module:
•
•
•
Catalyst 3650 Switch Hardware Installation Guide
4-2
Fan Module
1 2
4
Fan LED
Exhaust vent
Do not force the fan module into the slot. This can damage the pins on the switch if they are not
aligned with the module.
A fan module that is only partially connected can disrupt the system operation.
The switch supports hot swapping of the fan module. You can remove and replace the module
without interrupting normal switch operation.
3
3 Retainer clip
4 Extraction handles
Chapter 4 Installing the Fan
OL-29734-01