Stack Led; Rps Led - Cisco Catalyst 3650 Hardware Installation Manual

Chapter 1 Product Overview
Table 1-6
Color
Amber
Slow blinking green

STACK LED

The STACK LED shows the sequence of member switches in a stack. Up to nine switches can be
members of a stack. The first nine port LEDs show the member number of a switch in a stack.
shows the LEDs on the first switch, which is stack member number 1. For example, if you press the Mode
button and select Stack, the LED for port 1 blinks green. The LEDs for ports 2 and 3 are solid green, as
these represent the member numbers of other switches in the stack. The other port LEDs are off because
there are no more members in the stack.
Figure 1-8
1
2
3
When you select the STACK LED mode, the representative STACK LEDs are green when the StackWise
ports are up, and the representative STACK LEDs are amber when the ports are down.

RPS LED

The RPS LED is only available on Catalyst 3650-24PDM and 3650-48FQM switch models.
OL-29734-01
ACTV LED (continued)
Description
An error occurred when the switch was selecting the active
switch, or another type of stack error occurred.
Switch is in stack standby mode.
STACK LED
Stack member 1
Stack member 2
Stack member 3
4 5 6
4 LED blinks green to show that this is switch 1 in the stack.
5 LED is solid green to show that switch 2 is a stack member.
6
LED is solid green to show that switch 3 is a stack member.
Catalyst 3650 Switch Hardware Installation Guide
Catal yst 3650 48 Catal yst 3650 48Po
PoE+ 2X10 G E+ 2X10 G
G1
G2
G3
TE3 TE3
G4
TE4 TE4
Catal yst 3650 48Po
Catal yst 3650 48
E+ 2X10 G
PoE+ 2X10 G
G1
G2
G3 TE3 TE3
G4
TE4 TE4
Catal yst 3650 48Po
Catal yst 3650 48
PoE+ 2X10 G E+ 2X10 G
G1
G2
G3 TE3
TE3 G4
TE4 TE4
Front Panel
Figure 1-8
1
2
3
1-19