Charging The Battery - AEG MPS 4920 Instruction Manual

• Attach the desired accessory onto the shaft. You can attach or remove
the accessories by simply pushing them onto the shaft of the drive unit or
pulling them off .

Charging the battery

• Switch the unit "OFF" and insert the plug of the mains adapter into the
socket at the back of the drive unit.
• Now insert the plug of the mains adapter into a 230 V / 50 Hz mains
socket.
• The charging lasts approx. 8 hours.
• Once the charging is over, unplug the AC adapter.
Use
NOTE:
Do not bathe or apply cream to your feet or hands before treatment, but
wash them after treatment.
• Turn the device on. With the switch you can change the direction of rota-
tion of the motor from clockwise to anticlockwise and select between two
diff erent speeds.
• Guide the accessory to be used with a gentle movement over the place to
be treated.
Constantly check at brief intervals the progress of the treatment to avoid
injuries.
Cleaning
• Always disconnect the mains adapter from the socket before cleaning!
• The machine must never be immersed in water!
05_MPS 4920 AEG.indd 41 05 MPS 4920 AEG.indd 41
CAUTION:
WARNING:
WARNING:
CAUTION: Do not use abrasive detergents.
English
41
05.09.2008 12:13:49 Uhr 05.09.2008 12:13:49 Uhr