Step 2: Setting The Time - Sony CMT-VP1 Operating Manual

Step 2: Setting the time

Before you can use the system's timer functions,
set the internal clock.
H
hH l
j
1
1
Press TIMER SET.
The hour indication flashes.
AM1200
2
Press +/– repeatedly to set the hour.
AM1100
3
Press ENTER.
The minute indication flashes.
AM1100
4
Press +/– repeatedly to set the minute.
AM1110
S s
L z
J 6
3,5
+
#
–
2
2,4
5
Press ENTER.
The clock will begin operating.
To reset the system clock
You can reset the system clock even when the
system is on or off. To reset the time while the
system is on, do the following:
1 Press TIMER SET.
2 Press +/– repeatedly until "SET CLOCK"
appears, then press ENTER.
3 Repeat step 2 to 5 in "Step 2: Setting the time".
Tip
If you make a mistake, start over from step 1.
7