Connecting A Vcr - Sony CMT-VP1 Operating Manual

Connecting optional components
(continued)
Connecting an MD deck for
digital recording
By connecting an MD deck to the system with a
commercially available optical cable, you can
make a digital recording from a CD.
To the digital input connector
on the MD deck
Note
You cannot make a digital recording from a
VIDEO CD to an MD deck through an optical
cable. You can, however, make an analog
recording through an optional audio connected to
the LINE OUT jacks. (See "Connecting an MD
deck for analog recording.")
10

Connecting a VCR

You can connect a VCR to the system with a
commercially available audio cord. Be sure to
match the color-coded pins to the appropriate
jacks. To listen to the VCR after connecting it,
press MD/VIDEO until "VIDEO" appears.
By connecting the audio output jacks on your
VCR to the VIDEO IN jacks using an optional
audio cord, you can enjoy powerful stereo sound
with the video playback.
Moreover, if you connect the audio input jacks on
your VCR to the LINE OUT jacks and VIDEO
OUT jack using the supplied video connecting
cord, you can record the audio and video signals
from a VIDEO CD onto video tape.
To the audio input
jacks on the VCR
To the audio output
jacks on the VCR
To the video input
jack on the VCR