Makita 9523NBH Angle Grinder page 6

To tighten the lock nut, press the shaft lock
I
firmly so that the spindle cannot revolve,
then use the lock nut wrench and securely
tighten clockwise.
I
7
Lock
/ -
I
S h a f t ' o c k -
WARNING:
Only actuate the shaft lock when the spindle is not moving
Switch action
CAUTl ON :
Before plugging in the tool, always check to see that the switch actuates properly and
returns to the "OFF" position when the rear of the switch lever is depressed
To switch on, depress the rear of the
switch lever and push it forward. Then
depress the front of the switch lever to
lock it.
6